+632-8 5847-412 | +632-8 522-5101 | +632-8 584-4943 | +6349-549-1943 to 45

How To Fix A Broken Headlight Bulb

How To Fix A Broken Headlight Bulb

 

Having faulty or broken parts in your car is always risky as this can be the cause of car accidents. Whether it be a damaged local U-bolt or a broken headlight, having a faulty car part can be very dangerous when driving. Broken headlights are some of the most common car problems as lights tend to wear out after a certain period of time. This can be a cause for accidents and can even get you a traffic violation if caught driving with one.

To prevent this from happening, here is how you can fix your broken headlight bulb.

 

Disconnect the car battery

Before you start removing parts to replace your car’s headlight bulb, it is important to disconnect the car battery first. This will prevent any mishaps such as electric discharge from harming you while repairs are ongoing. All you have to do is remove the battery’s negative terminal to stop the power. Reconnect the car battery once you have successfully installed the replacement bulb.

 

Find the headlight holder

Find the headlight holder

The next step is finding the headlight holder. You can find it by opening up the hood of the car and checking the back of the headlights. From there, you should be able to see at least three wires that will lead you to the power wires.

 

Remove parts to access the headlight

This is an optional step, as certain car models require you to remove engine covers and other trim components in order to replace your headlights. It is important to handle a lot of these parts with care, as they are small and thin parts that can break easily. It is best to have spare parts around in case any of them breaks.

 

Unplug the headlight wire

Unplug the headlight wire

Once you have located the back of your headlight, the next step is to carefully unplug the headlight wire. It is important to pull it from the clip instead of the wire, as you might damage the wires. Some clips require you to rotate them to release the connection, while some have a small lever to unplug the wiring. You can also check if there is any damage to the wires as well, as this might cause problems in your car’s electrical system.

 

Install the new headlight and reconnect all parts

After removing all of the necessary parts, the next step is to remove the old bulb and replace it with a new one. Replacement bulbs are very common in your local auto repair shop, which means you can buy a set of spares just in case they break again. Before installing, make sure that you handle the new bulb with care, as any contact may damage the bulb or shorten its lifespan.

After installing the new headlight, you can now reconnect all of the wirings, parts, and trims that you removed.

 

Test the headlights

Test the headlights

After reinstalling all of the parts, you can now test if your new headlights are working. It is best to test it for a number of minutes to see if there are any issues with the bulb or your car’s wiring. Should problems persist with your headlights, check your wiring and bulbs again.

 

Key Takeaway

Broken headlights can be the cause of car accidents, which is why you should have them repaired immediately. By following this quick and effective guide, you will be able to make your car headlights work again in no time.

Popular Post

Brake And Accelerator Pedal Of Automatic Transmission Car

Signs That You Need To Fix Your Car Brakes

Car Trade-In Tips You Should Know

Car Trade-In Tips You Should Know

×
×

Cart